Steps to Setup Orbi Wifi Router

 

The Orbi Wifi router system is the best option if you want a stable, fast, and strong wireless network. An Orbi Wifi, unlike any other Wifi extender, provides constant connectivity. Thus if you want a strong and fast internet connection then you have to setup Orbi Wifi router.

Stage 1: Configuring the Main Wireless Router

· To begin, unplug your modem and wait for 25–30 seconds. After that, re-plug the modem and go to the next step to reset the modem. This assigns you a new IP address, which simplifies the setup procedure.

· Connect the Ethernet cable from the modem to the yellow-colored port on the Orbi router setup. This port is available only on the main router, not the satellite. The power wire must then be plugged into the main router. The power cable is included in the package.

· Turn on the power button once you’ve connected everything. After that, push the power button located on the router’s rear. The green light will turn on when you push the power button. The white-colored LED on the main Wifi Orbi router begins blinking once the router is turned on.

Stage 2: Satellite Installation

· Turn on the Satellite by plugging it into the power adapter.

· After that, press the power button on the back of the device.

· The green light on the satellite begins to blink as soon as you click the button.

· The Orbi satellite’s LED light will turn white.

Stage 3: Configure the wireless router

· Launch the app or the web browser. Check to see if the app or web browser is linked to the Orbi network.

· You must now navigate to orbilogin.com, which is the official login page. A login screen will appear, or you can use your phone to open the app.

· You must enter your password and username on the login screen.

· Select the QR code from the drop-down menu and scan the code on the router’s backside. This facilitates the setting and setup process to install Orbi router.

· Choose the area of the satellite on the supplied page by following the on-page instructions.

· Next, press the Next button and follow the instructions on the screen. Allow 3 minutes for the entire setup process to complete. After that, the Orbi router light will become white.

· To sync the Satellite device with the main Orbi router, hit the Sync button. The satellite that is attached to the main router will also be identified by the app. To add new ones to the router, simply click the Add Satellite option.

Thus if you want to connect an Orbi WiFi router after setting it up then the information provided in this blog will help you. You can also contact our team members or visit orbilogin.net for more information.