Simple Instructions on How to Install Orbi Router

Orbi WiFi router is a fantastic device used to enhance the WiFi network to the long extent even in the dead zones. If you want to boost the wireless signals and the network to your entire home or office then don’t panic! You have landed on the right platform. With an Orbi router, you can easily achieve it and use the high-speed internet connection on your device. If you are searching for the instructions on how to install Orbi router then this blog might help you in doing the same. This blog presented the step-by-step guidelines for the complete setup of the Orbi router on your device whatever you are using. Scroll down till the end and check out the steps one-by-one. 

Simple Instructions on How to Install Orbi Router

Steps to Install Orbi Router Using the Manual Method 

Carry out the below steps to install the Orbi router on your device through the manual method:

Step 1: The first step is to plug-in your Orbi router into the command support and turn it on.

Step 2: After that, you have to connect your Orbi satellite and Netgear Orbi router.

Step 3: Thereafter, go to the Network manager and connect with the Netgear_ext SSID or your wireless network.

Step 4: Next, launch any internet browser of your choice from your system. Ensure that the internet browser you are using is updated to the latest available version. 

Step 5: Enter orbilogin.com or orbilogin.net in the URL bar of the internet browser to reach to the Orbi router login webpage. You can also use the IP address 192.168.1.1 or 192.168.0.1. 

Step 6: Now, you will be redirected to the Orbi router login webpage. 

Step 7: The system will prompt you to enter the Orbi login credential details including the username and password. 

Step 8: Enter the correct username and password in the respective field. 

Step 9: You will be navigated to the admin page of the Orbi router. Select the network that you want to extend. Tap on the Next button to proceed further.

Step 10: In the next step, you have to set the identification for the Orbi satellite same as the Orbi router.

Step 11: Click on the Finish button.

Step 12: Finally, you can place the Orbi satellite at anyplace of your preference. 

Instructions to Install Orbi Router through WPS Method

Follow the below steps to install the Orbi router using the WPS method:

Step 1: Firstly, ensure that the Orbi satellite is plugged into the power socket and turn on the Netgear Orbi.

Step 2: After that, search for the WPS button of the Orbi satellite. Press the button for some time.

Step 3: Thereafter, press the WPS badge of the Orbi router.

Step 4: If the Orbi satellite LED light turns to green then it means that the Orbi router is configured with the WiFi extender setup. 

Step 5: If you have a dual-band extender like 2.4GHz and 5GHz extender then use the same method.
Step 6: Turn on your device. 

Step 7: Launch the internet browser and enter the Netgear Orbi login address 192.168.0.1. You can also use the Orbi router login address setuporbi.com or orbilogin.net.

Step 8: Finally, you are redirected to the Orbi router web page. 

Step 9: Enter the login credential details.

Step 10: Once you reach the router login page then go to the wireless option. 

Step 11: Connect your extender to the system using the same identification of the network of the router. 

Step 12: Enter the password for the Orbi router to access the Netgear satellite set up page. 

Congrats! With the above steps, you can install Orbi router on your device without facing any difficulty.